Wood Lathe Tools and Their Types

Most woodworkers have at least one wood lathe tool. Usually the first of these wood lathe tools is the round gouge. This implement enables the woodworkman to bring the round piece of wood into a precise round shape suitable for working with. The end result after using this tool often is turned up at an angle, with the end still roughened to hold the rounded shape. This tool also provides a place for hand tools such as the plane and round blade for sharpening nails and other fasteners.

The second of the wood lathe tools is the chisel. While normally used as a power tool to remove pieces of wood, it can also be used to cut shapes into the wood. With a chisel, woodworkers can produce angled or curved cuts to enlarge designs or help complete a design. A chisel is often used in applications requiring a level of detail that is less forgiving than using a router.

A band saw is the next wood lathe tools used. A band saw is an excellent for creating intricate crosscutting patterns. Crosscutting is a technique in wood lathes where the wood worker cuts a piece of wood crosswise and then backhand so that the wood ends up with both vertical and horizontal cuts. Using a band saw in crosscutting patterns can result in intricate designs that are impossible to achieve by other tools. Crosscutters also allow woodworkers to cut small openings or grooves in wood.

One of the simplest wood lathe tools is the turning chisel. Used as a standalone tool, the chisel is a flat-tipped implement that has a tapered point on one end. It is used more frequently as a finishing tool than as a grinding tool. A turning chisel has a tapered point on both ends and is primarily used in crosscutting operations. Like the chisel, it is not used in applications requiring detailed accuracy.

One of the final wood lathe tools is the wood gouger. This tool resembles a claw hammer but is meant to be aimed at wood that is slightly harder than wood lathe tools. Wood workers typically use gouges in finishing or sanding operations. gouges are available in many sizes and angles and provide workers with opportunities to create elaborate designs and patterns. A wood gouge is most often used as a finishing tool and is primarily used to flatten the wooden surface after it has been cut.

Lathe workers also use small hand tools such as file hammers to perform fine finishing tasks. They provide workers with a range of alternatives that allow them to finish their woodturning projects in the safest and most efficient manner possible. The best results are obtained when all the wood lathe tools that a woodturner needs are in working order.

A file, hammer, chisel and gouge are all included in the set of basic wood lathe tools. A woodturner can make use of several other specialized equipment depending upon the nature of his or her woodturning projects. For example, some woodworkers prefer to turn with a band saw instead of a burr wheel because they find it easier to control the depth of the cut with the band saw. Other workers may prefer to work on smaller projects using a skew chisel and a simple straight edge blade.

All the woodturners need to have the best wood lathe tools in order to produce beautifulturning projects that will stand the test of time. Workers should also be aware of safety precautions that need to be observed while operating these valuable tools. Intense heat and a sharpening system that is not properly maintained can result in serious accidents. It is important for woodturners to be aware of the different types of wood lathe tools that are available to them, as well as the best way to maintain each tool.